Rastlinjak «RUBY LUX 2.5»
Širina 2,5 m. Dolžina 4 m, 6 m, 8 m and more. Korak lokov 1 m ali 0,65 m. Dvojni loki. Okvir iz pocinkane cevi 25x25 + 20x20 Greenhouse height - [[calc.options[selected.width].height]] meters
Side wall - [[calc.options[selected.width].wall.toString().replace('.',',')]] meters
The height is specified without taking into account the foundation
Greenhouses longer than [[maxlength]] m are calculated individually.
You can specify the length of the greenhouse you are interested in using the shopping cart, leaving a comment, or by phone, or at the sales office.
Assembling a greenhouse with a foundation by the company's specialists is high-quality, with a guarantee.
Average build time - [[calc.options[selected.width].time_install]].
Note: You can always build a greenhouse yourself.
In more detail...Size
The width of the greenhouse is 2.5 meters.
Length - 4.025 m, 6.025 m, 8.025 m and more, in multiples of 2 meters.
These dimensions correspond to the dimensions of the foundation along the outer edge.
The height of the greenhouse is 2.3 meters.
The height is indicated without the foundation.
Frame
The greenhouse has two doors and two vents at opposite ends.
The door pillars and the base of the greenhouse are made of galvanized square pipe 25x25 - the doors do not hang out, everything is secure!
Thanks to the galvanized frame, the greenhouse is extremely resistant to rust and does not require touch-ups during operation (unlike greenhouses painted with primer-enamel).
The frame is assembled using a crab system. With this method of assembling the frame, the longitudinal guides (lintels connecting the arcs) are in the same plane with the polycarbonate, which provides the polycarbonate with additional support.
Double truss arcs are made of square galvanized pipe 20x20.
The distance between the arcs is 1 m or 0.65 m.
A greenhouse with a distance between the arcs of 0.65 m has a triple margin of safety.
Note! The ends of the greenhouse are also made of a double arc-truss, which gives the greenhouse a more solid and beautiful look.
New! Reinforced ends and doors:
1) Reinforcements protect the greenhouse from windage, prevent the formation of "pops" and rattling of polycarbonate under the influence of wind;
2) Give the ends additional rigidity, protect the ends and doors from snowdrifts.
The frame is fastened by 7 longitudinal guides, which prevent the polycarbonate from falling under the weight of the snow cap and give the frame additional rigidity.
A greenhouse with an arc pitch of 0.65 m is guaranteed to withstand significant snow and wind loads, and does not require maintenance in the winter.
Polycarbonate
As a cover for the greenhouse, we recommend polycarbonate of our own production «GREENHOUSE FACTORY» with a thickness of 4 mm with effective sheet protection from ultraviolet radiation (UV protection) both on the surface of the sheet and in its mass.
UV protection prolongs the life of polycarbonate and prevents its destruction (haze, brittleness).
Polycarbonate attachment
Reinforced fastening of polycarbonate with roofing screws with a rubber press washer through a galvanized tape. This mount:
1) Prevents tearing and damage of polycarbonate under the influence of strong wind and snow cap;
2) Securely presses the polycarbonate along the entire length of the greenhouse arc with a galvanized tape. Your polycarbonate will not fly around the neighbors' garden;
3) Avoid accidental
Equipment
The greenhouse has two windows and two doors at opposite ends.
Additionally, you can purchase self-opening (depending on temperature) automatic vents.
All the necessary fittings for assembling the frame of the greenhouse and fixing the polycarbonate are included.
Peculiarities
With a width of 2.5 m, the greenhouse has an increased height of 2.3 m, which allows it to be used for growing tall tomatoes and other crops.
The presence of double arcs on the greenhouse makes it easy to tie plants to them and attach additional equipment.
The increased number of arcs (the distance between the arcs is 0.65 m) and the design of double arc-trusses greatly increase the margin of safety, the greenhouse can withstand any snow and wind loads. This greenhouse does not fail.
Mounting
The minimum number of collapsible elements ensures ease of assembly, so 95% of buyers install the greenhouse on their own.
Our company strongly recommends installing a greenhouse on a beam 150x100, 100x100.
The use of a smaller section of timber as a foundation, for example, 100x50 boards, is not recommended and can only be used for extreme savings.
Before self-assembly of the greenhouse, you can watch the video instruction on our website at the bottom of the page.
A detailed printed version of the instructions is included with each greenhouse.
Approximate installation time of the greenhouse - 3 hours.
Exploitation
Regardless of the strength of the frame, in case of excessive precipitation, it will not be superfluous to clean the snow cap. For the winter period, it is necessary to close the doors and vents of the greenhouse.
In greenhouses made of polycarbonate, the use of sulfur checkers is prohibited. Their use can lead to premature destruction of polycarbonate, corrosion of fittings and the frame of the greenhouse.
Avoid contact with chemicals on the frame of the greenhouse.
It is recommended to lubricate the locks of the greenhouse during installation and during operation with engine oil to prevent jamming of the locks and, as a result, damage to the handles.
To clean the greenhouse from dirt and dust, we recommend using a touchless sink or a soft cloth, a sponge dipped in warm soapy water.
It is forbidden to apply paint on polycarbonate on your own and use detergents containing salts, alkalis, ethers, aldehydes, chlorine, methanol for cleaning.
Storage
The disassembled greenhouse must be stored in a dry room (with long-term storage of 10 days).
Polycarbonate sheets are best stored unfolded, preferably indoors, to prevent excessive heating from sunlight (in summer). With prolonged exposure to sunlight, the protective film and the polycarbonate itself may stick together, which will make it difficult to remove the film in the future and spoil the appearance of the product.
A polycarbonate sheet can be stored rolled up for a long time at temperatures from minus 40 degrees to plus 60 degrees. With this storage, the roll is placed vertically (standing up) to avoid damage and dents on the polycarbonate from stones and bumps.
Additional products and services
We recommend installing the greenhouse on the foundation
Greenhouse length
0.65 m-Recommended for polycarbonate greenhouses. It can withstand heavy snow and wind loads.
1 m - Inexpensive greenhouses that require maintenance (snow removal, installation of supports). It is not recommended to install in places with strong wind gusts.
Used to save money. In the gaps between the piles (after ~ 1 m), it is necessary to place bricks, bars or other improvised supports, in order to avoid deformation of the frame under the weight of the snow cap.
A strong, reliable foundation. The greenhouse does not fly, does not walk! A solid foundation eliminates the deformation of the frame under the weight of the snow cap. It does not require additional supports. 100% quality.
Wooden beam 100 mm by 50 mm. Economical foundation option.
Wooden beam 100 mm by 50 mm. Great option. Increases the overall height of the greenhouse.
The exact cost will be calculated in the office
Unknown word
orin sales offices
The cost of beds is calculated individually
Wooden beam 100 mm by 50 mm. The most common foundation option. We recommend it!
Thanks to the reinforcements, the polycarbonate does not pop or rattle under the influence of wind + additional protection from snowdrifts.
- Securely presses polycarbonate over the entire arc length.
- Prevents the polycarbonate from being torn off and damaged by strong winds and snow caps.
- Securely presses polycarbonate over the entire arc length.
- Prevents the polycarbonate from being torn off and damaged by strong winds and snow caps.
Note: For the greenhouse « Pro » with a width of 3 m.
- Securely presses polycarbonate over the entire arc length.
- Prevents the polycarbonate from being torn off and damaged by strong winds and snow caps.
Note: For the Narodnaya greenhouse with an arc pitch of 0.65 m.
You can open and close the doors while inside the greenhouse.
Pens are something you'll use regularly!
Not all manufacturers complete their greenhouses with double-sided handles.
Thanks to the reinforcements, the polycarbonate does not pop or rattle under the influence of wind + additional protection from snowdrifts.
- Polycarbonate does not pop or rattle under the influence of wind.
- Additional protection from snowdrifts.
- Polycarbonate does not pop or rattle under the influence of wind.
- Additional protection from snowdrifts.
- Polycarbonate does not pop or rattle under the influence of wind.
- Additional protection from snowdrifts.
- Polycarbonate does not pop or rattle under the influence of wind.
- Additional protection from snowdrifts.
- Polycarbonate does not pop or rattle under the influence of wind.
- Additional protection from snowdrifts.
- Polycarbonate does not pop or rattle under the influence of wind.
- Additional protection from snowdrifts.
- Polycarbonate does not pop or rattle under the influence of wind.
- Additional protection from snowdrifts.
- Polycarbonate does not pop or rattle under the influence of wind.
- Additional protection from snowdrifts.
- Polycarbonate does not pop or rattle under the influence of wind.
- Additional protection from snowdrifts.
Thanks to the double truss arches, the greenhouse can withstand significant snow and wind loads.
It is convenient to tie up plants or attach additional equipment to double arcs.
The greenhouse frame is made of galvanized pipe both outside and inside. Increased corrosion resistance compared to conventional metal.
Thanks to the double truss arches, the greenhouse can withstand significant snow and wind loads.
It is convenient to tie up plants or attach additional equipment to double arcs.
The greenhouse frame is made of galvanized pipe both outside and inside. Increased corrosion resistance compared to conventional metal.
Greenhouses with a width of 5 m and 6 m have an additional decorative coating.
The greenhouse frame is a 40x20 fully galvanized pipe, both outside and inside. Increased corrosion resistance compared to conventional metal.
Reliable fastening by the «crab system» ensures a tight fit of the guides to the polycarbonate.
Reliable fastening by the «crab system» ensures a tight fit of the guides to the polycarbonate.
The greenhouse frame is a 40x20 fully galvanized pipe, both outside and inside. Increased corrosion resistance compared to conventional metal.
Increased corrosion resistance compared to conventional metal. It is convenient to tie up plants to double arcs
Thanks to the double truss arches, the greenhouse can withstand significant snow and wind loads.
It is convenient to tie up plants or attach additional equipment to double arcs.
The greenhouse frame is made of galvanized pipe both outside and inside. Increased corrosion resistance compared to conventional metal.
Door posts, bases and arches are made of 25x25 galvanized square pipe, guides and doors are made of 20x20 pipe. The pipe is fully galvanized both outside and inside. Increased corrosion resistance compared to conventional metal.
The greenhouse frame is a 25x25 square pipe, fully galvanized both outside and inside. This gives the greenhouse increased resistance to corrosion, unlike conventional metal.
The greenhouse frame is a 25x25 square pipe, fully galvanized both outside and inside. This gives the greenhouse increased resistance to corrosion, unlike conventional metal.
The greenhouse frame is a 40x40 square pipe, fully galvanized both outside and inside.
It has an additional decorative polymer coating. This provides additional protection against corrosion when exposed to chemicals or fertilizers (a simple galvanized coating may oxidize when exposed to chemicals).
The greenhouse frame is a square pipe completely galvanized both outside and inside. This gives the greenhouse increased resistance to corrosion, unlike conventional metal.
Thanks to the double truss arches, the greenhouse can withstand significant snow and wind loads.
It is convenient to tie up plants or attach additional equipment to double arcs.
The greenhouse frame is made of galvanized pipe both outside and inside. Increased corrosion resistance compared to conventional metal.
There is no damage and crumpling of polycarbonate when opening the door or window, unlike conventional hinges.
5 longitudinal reinforcements prevent polycarbonate from falling under the weight of snow. Give the frame additional rigidity.
7 longitudinal reinforcements prevent polycarbonate from falling under the weight of snow. Give the frame additional rigidity.
9 longitudinal reinforcements prevent polycarbonate from falling under the weight of snow. Give the frame additional rigidity.
11 longitudinal reinforcements prevent polycarbonate from falling under the weight of snow. Give the frame additional rigidity.
The slats press the polycarbonate tightly against the vertical wall. In strong winds, polycarbonate will not tear off the greenhouse.
The slats press the polycarbonate tightly against the vertical wall. In strong winds, polycarbonate will not tear off the greenhouse.
- Greenhouses with 1m arc spacing require winter maintenance (snow removal).
- It is not recommended to install in places with strong wind gusts.
- Greenhouses with 1m arc spacing require winter maintenance (snow removal).
- It is not recommended to install in places with strong wind gusts.
- Greenhouses with 1m arc spacing require winter maintenance (snow removal).
- It is not recommended to install in places with strong wind gusts.
- Greenhouses with 1m arc spacing require winter maintenance (snow removal).
- It is not recommended to install in places with strong wind gusts.
- Greenhouses with 1m arc spacing require winter maintenance (snow removal).
- It is not recommended to install in places with strong wind gusts.
- Greenhouses with 1m arc spacing require winter maintenance (snow removal).
- It is not recommended to install in places with strong wind gusts.
- Greenhouses with 1m arc spacing require winter maintenance (snow removal).
- It is not recommended to install in places with strong wind gusts.
We recommend it!
Greenhouses with 0.65 m arc spacing (increased number of arcs) can withstand significant snow and wind loads.
We recommend it!
Greenhouses with 0.65 m arc spacing (increased number of arcs) can withstand significant snow and wind loads.
We recommend it!
Greenhouses with 0.65 m arc spacing (increased number of arcs) can withstand significant snow and wind loads.
We recommend it!
Greenhouses with 0.65 m arc spacing (increased number of arcs) can withstand significant snow and wind loads.
We recommend it!
Greenhouses with 0.65 m arc spacing (increased number of arcs) can withstand significant snow and wind loads.
We recommend it!
Greenhouses with 0.65 m arc spacing (increased number of arcs) can withstand significant snow and wind loads.
We recommend it!
Greenhouses with 0.65 m arc spacing (increased number of arcs) can withstand significant snow and wind loads.
We recommend it!
Greenhouses with 0.65 m arc spacing (increased number of arcs) can withstand significant snow and wind loads.
We recommend it!
Greenhouses with 0.65 m arc spacing (increased number of arcs) can withstand significant snow and wind loads.
We recommend it!
Greenhouses with 0.65 m arc spacing (increased number of arcs) can withstand significant snow and wind loads.
We recommend it!
Greenhouses with 0.65 m arc spacing (increased number of arcs) can withstand significant snow and wind loads.
We recommend it!
Greenhouses with 0.65 m arc spacing (increased number of arcs) can withstand significant snow and wind loads.
We recommend it!
Greenhouses with 0.65 m arc spacing (increased number of arcs) can withstand significant snow and wind loads.
We recommend it!
Greenhouses with 0.65 m arc spacing (increased number of arcs) can withstand significant snow and wind loads.
We recommend it!
Greenhouses with 0.65 m arc spacing (increased number of arcs) can withstand significant snow and wind loads.
We recommend it!
Greenhouses with 0.65 m arc spacing (increased number of arcs) can withstand significant snow and wind loads.
We recommend it!
Greenhouses with 0.65 m arc spacing (increased number of arcs) can withstand significant snow and wind loads.
The distance between the arcs is 1 m.
Distance between greenhouse arcs. Greenhouses with arc spacing of 1 m require maintenance in winter. Greenhouses with an arc pitch of 0.65 m can withstand increased snow and wind loads.
One double arc truss can withstand up to 200 kg. A greenhouse with such arches can withstand any snow and wind loads.
Standard polycarbonate for greenhouses or equivalent.
We recommend it!
Polycarbonate of guaranteed quality of our own production with effective UV protection.
It feels denser than standard polycarbonate.
The service life is up to 15 years.
Check the required number of sheets and their length in sales offices and by phone.
- Modern and comfortable
- Beautiful appearance
- Save space on the plot
- Modern and comfortable
- Beautiful appearance
- Save space on the plot
Additional polymer coating:
- Attractive appearance.
- Provides additional protection against corrosion when exposed to chemicals or fertilizers (a simple galvanized coating may oxidize in contact with chemicals).
Recommended color: gray or white. In the basic configuration, the greenhouse is galvanized.
Individual payment is made in the sales office or by phone. Go to contacts.
Individual payment is made in the sales office or by phone. Go to contacts.
They give the greenhouse an attractive, well-groomed appearance.
Hardware, door handles and wrappers, corners and hooks.
The slats press the polycarbonate tightly against the vertical wall. In strong winds, polycarbonate will not tear off the greenhouse.
The slats press the polycarbonate tightly against the vertical wall. In strong winds, polycarbonate will not tear off the greenhouse.
The gift is issued when buying a greenhouse with a width of 3 m.
You can open and close the doors while inside the greenhouse.
Pens are something you'll use regularly!
Not all manufacturers complete their greenhouses with double-sided handles.
- Prevent polycarbonate from sinking under the weight of the snow cap.
- Give the frame additional rigidity.
The automatic piston can be purchased separately at sales offices or by phone.
The automatic piston can be purchased separately at sales offices or by phone.
The gift is issued when buying a greenhouse with Premium polycarbonate «ZGT» and a step between arcs of 0.65 m.
The automatic piston can be purchased separately at sales offices or by phone.
The gift is issued when buying a greenhouse with Premium polycarbonate «ZGT» and with an arc pitch of 0.65 m.
New product!
Galvanized steel channel 120x40 mm. It has an additional polymer coating, color-black.
Modern, aesthetic, strong, durable, eco-friendly Euro foundation.
In more detail...The gift includes a «Basic» set of piles for the greenhouse.
In more detail...The gift includes a «Basic» set of piles for the greenhouse.
The gift is issued when buying a greenhouse with an arc pitch of 0.65 m.
In more detail...The gift includes a «Basic» set of piles for the greenhouse.
The gift is issued when buying a greenhouse with Premium polycarbonate «ZGT» and with an arc pitch of 0.65 m.
The gift includes a «Basic» set of piles for the greenhouse.
Unknown word
Provides even watering of plants without physical exertion. The delivery package includes a 30-meter-long tape and accessories for mounting and connecting irrigation. It is recommended to use in conjunction with a tap valve with a timer (not included in the delivery package).
Provides even watering of plants without physical exertion. The delivery package includes a 30-meter-long tape and accessories for mounting and connecting irrigation. It is recommended to use in conjunction with a tap valve with a timer (not included in the delivery package). The gift is issued when buying a greenhouse with Premium polycarbonate «ZGT» and a step between arcs of 0.65 m.
Provides even watering of plants without physical exertion. The delivery package includes a 30-meter-long tape and accessories for mounting and connecting irrigation. It is recommended to use in conjunction with a tap valve with a timer (not included in the delivery package). The gift is issued when buying a greenhouse with Premium polycarbonate «ZGT».
Greenhouse 4 meters long for growing seedlings.
Greenhouse 4 meters long for growing seedlings. The gift is issued when buying a greenhouse with Premium polycarbonate «HRT» and a step between arcs of 0.65 m.
Greenhouse 4 meters long for growing seedlings. The gift is issued when buying a greenhouse with Premium polycarbonate «HRT».
Divides the space inside the greenhouse for growing various crops.
- Securely attaches the greenhouse to the ground.
- Long-lasting, durable.
- Easy to install.
- Increases the height of the greenhouse to 15 cm.
- Does not reduce the usable area inside the greenhouse.
Basic: Used to save money.
Reinforced: Recommended for use in places with strong winds and snowy regions.
In more detail...You can leave the purchased greenhouse for free storage in our warehouse until the season.
We will deliver the greenhouse by our own vehicle.
Individual delivery – fast delivery at a convenient time for you.
Preferential delivery – delivery as the vehicle is completed.
In more detail...Installment plan from the Factory - issued in the sales office or by phone. The order is shipped after full payment.
Through the bank - up to 6 months, issued in the sales office. Shipment of the order-immediately.
In more detail...Can I install a greenhouse without a foundation?
You can, but we recommend using a foundation because it:
- Serves as a support for the frame, provides rigidity of the base.
- Provides resistance to snow and wind loads, serves as an anchor for the greenhouse.
- Increases the overall height and volume of the greenhouse.
Wooden beam size 100x100, 150x100 treated with antiseptic. It is supplied with a set of accessories for assembly.
The use of a smaller section of timber as a foundation, for example 50x100 (board), is not recommended even in order to save money.
In more detail...Wooden beam size 150x100.
The use of a smaller section of timber as a foundation, for example 50x100 (board), is not recommended even in order to save money.
In more detail...Estimated cost of a greenhouse
The window opens and closes automatically when the ambient temperature changes.
It does not require power supply or batteries.
Recommended quantity for greenhouses with a length of 4 m-1 pc., 6 m-2 pcs., 8 m-3 pcs.
In more detail...- Prevents the penetration of insects.
- Prevents plants from sprouting in honeycombs.
- Protects against ingress of water inside.
Length 25 sq. m.
We recommend using it in conjunction with the UP profile.
Example of the required amount of tape: For an arched greenhouse 3x8 m – 1 pc. For a straight-walled greenhouse 3x8 m – 3 pcs. For more information, contact the sales office or by phone.
In more detail...- Prevents the penetration of insects.
- Prevents plants from sprouting in honeycombs.
- Protects against ingress of water inside.
- Gives the greenhouse a well-groomed appearance.
Profile length - 2.1 m
We recommend using it in combination with a protective tape.
In more detail...The table can be easily installed and removed if necessary. It is convenient to take care of seedlings and place garden tools.
In more detail...Suitable for garden tools or potted plants. The shelf can be easily removed and moved if necessary.
In more detail...They are made of galvanized C-shaped profile 120x40 mm with a wall thickness of 1 mm.
They have an additional decorative coating, the color is black.
Steel beds are the best offer in terms of quality today. Thanks to our own production, we can make beds according to your size.
In more detail...They are necessary for fixing the foundation of a timber or steel foundation to the ground (so that the greenhouse is not turned over or moved by the wind).
Minimum recommended amount:
4 m | 6 m | 8 m | |
---|---|---|---|
From timber | 2 pcs. | 4 pcs. | 6 pcs. |
Steel | 6 pcs. | 8 pcs. | 10 pcs. |
A timer tap is necessary to automate the watering of plants.
In more detail...Provides even watering of plants.
The delivery package includes a drip tape with a length of 30 meters and accessories for installation and connection of irrigation.
It is possible to use irrigation in automatic mode. To do this, you need to complete the irrigation with a tap valve with a timer (not included in the delivery package).
In more detail...- Form a bed.
- Give a well-groomed appearance to the greenhouse. The height of the beds is 17 cm.
Warm eurogrids of WPC (wood-polymer composite).
The front side has a 3D wood texture.
Height-15 or 30 cm.
The «Premium» segment garden bed is designed for those who appreciate beauty and aesthetics.
In more detail...Provides comfortable operation in the greenhouse (without puddles and dirt from irrigation). In the greenhouse, you can even walk in slippers.
In more detail...Individual payment is made in the sales office or by phone. Go to contacts.
Individual payment is made in the sales office or by phone. Go to contacts.
Go to the Warm beds of WPC (eurogriads) page and calculate warm beds.
Individual payment is made in the sales office or by phone. Go to contacts.
Video Instructions
They give the greenhouse an attractive, well-groomed appearance.
Thanks to the double truss arches, the greenhouse can withstand significant snow and wind loads.
It is convenient to tie up plants or attach additional equipment to double arcs.
The greenhouse frame is made of galvanized pipe both outside and inside. Increased corrosion resistance compared to conventional metal.
The cost of the greenhouse includes: frame + selected polycarbonate + accessories for assembly.
Feedback and questions
personal data